Select Page

Door Repair

 

Door Repair, Replacement & Installation Service

Door Repair

We provide door repairing and replacement service for all kind of doors such as wooden door, aluminium door, glass door, sliding door. Parts replacement such as door hinge replacementdoor & metal gate lock replacement , Gate Latch Replacement , HDB toilet door lock replacement , deadbolt Installation ,  floor spring installationdoor frames repair, door closer installationdoor alignment , door stopper installation , floor spring installation ,as well as sliding door roller replacement.  We fix a door for Toilet door, main door, room door, garage door and other doors. Below is the introduction of the aluminium doors.

Aluminum glass doors are home and office entrances made from a combination of the aluminum metal and glass panes. The doors are quite common in many parts of the world and are favored by offices and condominium owners. They are mainly recommended for regions that are not very hot given that aluminum is not a good heat conductor.

Another reason why they are loved by many people is the fact that they are easy to install and maintain. They are also readily available in many modern markets where they can be found in varying styles and designs. if you ever need to troubleshoot and repair your aluminum glass door, you can rely on this tips from LS Handyman Singapore:

  1. With this type of doors, you need to start by determining the exact type of door that has been installed in your home. Common types include: aluminum glass casement doors, aluminum glass fold doors, and aluminum glass slide doors.
  2. If the door refuses to open or close as easily as it used to in the past, it could be as a result of sagging. If this is the case, you will need to readjust it.
  3. A readjustment involves placing it once again in its original frame to ease the opening and closing movements.
  4. You will need to check the screws located at the middle and corner of each side of the rail. Use your screwdriver to unfasten the screws.
  5. Once unfastened, ask someone to help you place the door back to its original position. You must make sure that it is properly aligned with the rails or else you will have to repeat this process all over again.
  6. Once you are sure that it has been correctly placed, have your helper hold it firmly as you tighten the screws.

The above procedure will help you repair any aluminum glass door that had started to sag. If this does not solve the problem being experienced, then call in a professional as it means that the problem requires more than a simple fix to address it.

How Our Clients Say About LS Handyman Service ( S)  Pte Ltd

Frequently Asked Questions

What are the common issues that can occur with doors that require repair?

– Squeaking hinges
– Misaligned strike plates
– Worn-out weather stripping
– Warped door frame or panels
– Faulty door latch or knob
– Sticking or dragging door

How can one diagnose the problem with a malfunctioning door?

– Check for visible damage or wear
– Test door movement and alignment
– Listen for unusual sounds
– Inspect the door hardware

What tools are necessary for repairing a door?

– Screwdriver
– Hammer
– Pliers
– Sandpaper
– Wood glue
– Level
– Tape measure

What are the steps involved in repairing a squeaky door?

1. Tighten loose hinges
2. Lubricate hinges with WD-40 or silicone spray
3. Replace worn-out hinges if needed

How can one fix a door that is not closing properly?

1. Check for obstructions in the door frame or strike plate
2. Adjust the strike plate or door latch
3. Trim or sand the door edges if necessary

What are the different types of door repairs that can be done at home?

– Fixing squeaky hinges
– Adjusting misaligned doors
– Repairing damaged door frames
– Replacing faulty door hardware

Are there any safety precautions to keep in mind while repairing a door?

– Use protective gear like gloves and goggles
– Work in a well-lit area
– Be cautious with sharp tools
– Ensure proper ventilation when using adhesives or paints

When should one consider hiring a professional for door repair?

– If the repair involves structural issues
– If you lack the necessary tools or skills
– If the door is under warranty
– If the repair requires electrical work

How can one prevent future door repairs or maintenance issues?

– Regularly lubricate hinges and hardware
– Keep door frames and panels clean and dry
– Fix minor issues promptly before they worsen
– Install a door sweep or weather stripping to minimize wear

What are the signs that indicate a door needs immediate repair?

– Difficulty opening or closing the door
– Persistent squeaking or grinding noises
– Visible damage or cracks on the door
– Drafts or leaks around the door frame

 

LS Handyman Singapore